Idler Brackets & Mounting Frames

Product Overview

Idler Brackets & Mounting Frames are the slotted drop and side brackets plus channel supports that carry CEMA D/E idlers on the conveyor structure, supplied painted or galvanized to match existing spacing for retrofit, repair and new builds. Rather than replacing a whole frame when brackets bend or rust, you swap the slotted brackets and keep the channel; custom support builds are cut to your belt width and idler spacing.

Key Features

Grade

D (Heavy-Duty)

Type

Idler brackets and support frames

Style

Slotted drop / side brackets, channel

Finish

Painted or galvanized

Fit

Match CEMA D/E idler spacing

Use

Retrofit, repair and new installation

Applications

Idler retrofit and replacement on existing frames
Spare mounting hardware for repairs
Custom channel support builds

How to Choose This Component

Grade and load: choose CEMA E for extra-heavy, high-tonnage and overland duty; CEMA D for heavy-duty mainstream sections. Size the roller diameter and bracket spacing to the expected impact, belt load and material flow.
Belt width: match the part to your belt (All widths). When requesting a quote, send belt width, required trough angle or drum diameter, and installation spacing so we can confirm a drop-in fit.
Working environment: tell us whether the duty is wet, dusty, sticky, abrasive or high-drop so we can match the seal, lagging, material and surface finish.
Retrofit and mounting: provide existing bracket spacing and frame type for a direct replacement; painted or galvanized finishes are both available.

Why Source These Spare Parts From Us

Built to CEMA D/E and ISO alignment standards for interchangeability with existing frames.
Direct factory supply with no middleman markup; OEM and private-label orders accepted.
Custom dimensions, lagging, seals, shafts and finish built to your specification.
Seaworthy timber or carton export packing; shipped to 60+ countries by sea, air and express freight.
Engineer support on selection and a written quote within 48 hours.

Frequently Asked Questions

What build grade and rating is the Idler Brackets & Mounting Frames?

Idler Brackets & Mounting Frames is supplied at D (Heavy-Duty). It is engineered to match CEMA D/E and ISO expectations for All widths belt duty and can be customized to your dimensions, lagging and finish.

What belt widths does the Idler Brackets & Mounting Frames cover?

This component is sized for All widths. Send your exact belt width, required angle or diameter and installation spacing when requesting a quote so we can confirm a direct, drop-in fit.

How is the Idler Brackets & Mounting Frames sealed against dust and water?

Protection follows sealed, labyrinth-protected construction. Labyrinth-style sealing keeps grease in and fines, moisture and wash-down out, extending service life in harsh bulk-handling conditions.

Can I order a custom Idler Brackets & Mounting Frames?

Yes. Dimensions, lagging or coating, seal, shaft and finish are built to your specification; standard lead time is 15–25 working days and 30–45 days for fully custom builds.

Ordering & Customization

MOQ: trial and sample orders welcome; volume improves pricing
Lead time: 15–25 working days standard; 30–45 days for custom build
Custom: size, lagging, seal, shaft and finish built to your specification
Export packing: seaworthy timber or carton packing for long sea transit

Typically Paired With

Components commonly ordered alongside this part to complete the station:

Screw Take-up Frame CEMA E Flat Return Idler CEMA D Flat Idler (Single Roller)